Monitoring metal contamination levels and fecal pollution in clam (Tapes decussatus) collected from Izmir Bay (Turkey)

The aim of this study was to monitor the heavy metal contents and fecal pollution in Tapes decussatus (carpet shell clam) from Izmir Bay (Eastern Aegean). Bivalve mollusks were sampled on January, March, July, and October 2007 in the Izmir Bay. Izmir Bay is one of the great natural bays of the Mediterranean. Concentrations of heavy metals were determined in the clams from the different seasons. Fecal coliform densities were determined to evaluate the degree of water pollution and clams’ microbiological accumulation of the classical microbial pollution indicators. The concentration of heavy metals in T. decussatus from Izmir Bay were Hg 0.044–0.13; Cd 0.026–0.24; Pb 0.38–1.2; Cr 2.3–3.7; Cu 6.4–8.4; Zn 56.0–81.8, and Ni 8.1–9.6 μg/g (dry weight). The maximum values were generally obtained in July and March except Ni. This study found that the levels of heavy metals except Cr in T. decussatus were below Spanish and European Communities legislations for shellfish as food. Microbial pollution indicators (heterotrophic bacteria and fecal coliform) were measured in T. decussatus. Maximum heterotrophic bacteria and fecal coliforms were recorded in the winter while the lowest were detected in summer.     

A chemical substitution study for a wet processing textile mill in Turkey

Wet processing textile industry has many different processing stages (dyeing, sizing, de-sizing, scouring, softening, etc.). Many chemicals currently used in the wet processing textile industry affect the amount and the type of waste produced and their influence on the aquatic life of the receiving stream. One of the critical steps in pollution prevention studies is auditing the use of chemicals and making the necessary chemical substitutions. This chemical substitution study was conducted on one of the major textile factories in Turkey with a capacity of 20,000 tons of denim fabric per year. During this study, chemical consumption level, receipts applied, environmentally problematic and alternative chemicals were examined. Integrated Pollution Prevention and Control (IPPC) Reference Document on Best Available Techniques (BAT) for the Textiles Industry was accepted as main reference document and also related case studies were examined. According to the study, over 70% reduction in sulphide, which is very toxic to aquatic life, was achieved by replacing sulphur dyestuff with low sulphide content. By replacing an alternative complexing agent, the mill not only prevented the 3100 kg/month COD load to the wastewater treatment plant (WWTP), but also obtained more biodegradable wastewater generated during production. On the other hand, some of the chemical substitution options were on progress or dropped.     

Assessment of trace metal pollution in surface sediments of Nemrut Bay, Aegean Sea

Surface sediments collected from nine stations in Nemrut Bay, Aegean Sea were analyzed for trace metals (Hg, Cd, Pb, Cr, Cu, Zn, Mn, Ni, Fe, As, and Mg) and grain sizes. The results were compared with the numerical sediment guidelines used in North America as well as literature values reported for similar studies conducted in Izmit Bay and Izmir Bay. The metal levels were also evaluated according to the enrichment factor and contamination factor analyses. The analyses revealed significant anthropogenic pollution of Hg, Pb, Zn, and As in the surficial sediments of Nemrut Bay.     

Determination of Cu, Pb, Zn, Ni, Co, Cd, and Mn in road dusts of Samsun City

The dust samples from 52 different locations in central roads of Samsun City were collected in a study area of 40 km long for the purpose of determining total metal concentrations of dust samples by flame atomic absorption spectrometry. The concentrations of Cu, Pb, Co, Zn, Ni, Mn, and Cd were found in the ranges of 11.92–352.43, 5.47–223.57, 4.52–41.69, 40.85–173.10, 18.71–131.29, 133.19–179.13, and 0.02–6.16 mg/kg, respectively. The results showed that metal levels were higher around the industrial area than other locations. Principal component analysis was also carried out to ascertain the possible contributing factors towards the metal concentrations. Validation of the analytical results was tested by analysis of the BCR 032 Moroccan phosphate rock certified reference material.     

Morphometric and electrophoretic analysis of 13 populations of Anatolian black pine in Turkey

The genetic variation in populations of Anatolian black pine (Pinus nigra Arn. subsp. pallasiana (L.) Holmboe.), one of the species covering large areas in Turkey, was investigated. Open pollinated seeds were collected from 13 populations in a natural distribution range. Six characters of seeds (length, width, ratio of length to width, weight/1000 seeds) and seedling characters (cotyledon number and hypocotyls height) and two enzyme systems viz. leucine aminopeptidase (LAP) and glutamate oxaloacetate transaminase, (GOT) were investigated. Significant differences were detected among the populations for the morphological characters. In addition, isozyme patterns of two enzyme systems revealed that LAP has two loci (one with 2 alleles and the other with 3), while GOT has three loci (two with 3 alleles and the third one with 2 alleles). Polymorphic loci were 74% on the average. The mean number of alleles per loci was 1.94 and expected heterozygosity was 19%. The mean total genetic diversity was calculated as 0.203; the mean gene diversity within populations was determined as 0.188, and the average between subpopulations diversity was 0.016. The relative magnitude of genetic differentiation among subpopulations was measured as 0.074 indicating that only 7.4% of the total genetic diversity was there between populations. Average genetic distance was 0.093 according to Gregorius. Nei's genetic distance was 0.022.     

Effect of feeding time on the performance of a sequencing batch reactor treating a mixture of 4-CP and 2,4-DCP

This paper investigated the biodegradation kinetics of 4-chlorophenol (4-CP) and 2,4-dichlorophenol (2,4-DCP) separately in batch reactors and mixed in sequencing batch reactors (SBRs). Batch reactor experiments showed that both 4-CP and 2,4-DCP began to inhibit their own degradation at 53 and 25 mg l(-1), respectively, and that the Haldane equation gave a good fit to the experimental data because r(2) values were higher than 0.98. The maximum specific degradation rates (q(m)) were 130.3 and 112.4 mg g(-1) h for 4-CP and 2,4-DCP, respectively. The values of the half saturation (K(s)) and self-inhibition constants (K(i)) were 34.98 and 79.74 mg l(-1) for 4-CP, and 13.77 and 44.46 mg l(-1) for 2,4-DCP, respectively. The SBR was fed with a mixture of 220 mg l(-1) of 4-CP, 110 mg l(-1) of 2,4-DCP, and 300 mg l(-1) of peptone as biogenic substrate at varying feeding periods (0-8h) to evaluate the effect of feeding time on the performance of the SBR. During SBR operation, in addition to self-inhibition, 4-CP degradation was strongly and competitively inhibited by 2,4-DCP. The inhibitory effects were particularly pronounced during short feeding periods because of higher chlorophenol peak concentrations in the reactor. The competitive inhibition constant (K(ii)) of 2,4-DCP on 4-CP degradation was 0.17 mg l(-1) when the reactor was fed instantaneously (0 h feeding). During longer feedings, increased removal/loading rates led to lower chlorophenol peak concentrations at the end of feeding. Therefore, in multi-substrate systems feeding time plus reaction time should be determined based on both degradation kinetics and substrate interaction. During degradation, the meta cleavage of 4-chlorocatechol resulted in accumulation of a yellowish color because of the formation of 5-chloro-2-hydroxymuconic semialdehyde (CHMS), which was further metabolized. Isolation and enrichment of the chlorophenols-degrading culture suggested Pseudomonas sp. and Pseudomonas stutzeri to be the dominant species.     

Genotoxic biomonitoring study of population residing in pesticide contaminated regions in Göksu Delta: micronucleus, chromosomal aberrations and sister chromatid exchanges

Pesticides are widely used throughout the world in agriculture to protect crops and in public health to control diseases. Nevertheless, exposure to pesticides represents a potential risk to humans. This paper describes a study of possible genetic damage in the people living in regions contaminated with complex mixture of pesticides in G?ksu Delta. In this study, used methods were chromosomal aberration (CA), sister chromatid exchange analysis (SCE) in the peripheral blood lymphocytes, and micronucleus (MN) assay in the buccal epithelial cells. In the present investigation, 32 affected subjects consist of 16 smoking and 16 non-smokings and an equal number of control subjects were assessed for genome damage. Micronucleus (MN), Broken egg (BE), Karyorrhexis (KR), Karyolysis (KL) and Binucleus (BN) frequencies were higher in affected subjects than in controls. Smoking had a statistically significant effect on the Micronucleus, Karyorrhexis and Binucleus frequencies for both the control and the exposed group. Also smoking and exposure affected the frequency of sister chromatid exchange and chromosomal aberrations compared with control groups.     

Factors related to presenteeism among employees of the private sector

The objective was to explore the relationship between person-based variables and work-related variables of presenteeism in four different private sector workplaces. Employees (N=413) filled in a questionnaire related to demographic and socio-economic characteristics, social networks, work-related factors, lifestyle factors and state of health. Presenteeism was assessed using the Stanford Presenteeism Scale 6 (SPS-6). The majority of respondents were male (77.2%), and mean age was 34.7±8.1 years. The prevalence of chronic conditions was 15.9%. The mean score for the SPS-6 was 19.9 (SD, 3.3). The female score was higher than the male score on the SPS-6 in this study. Total score was higher among workers who reported working at high speed. SPS-6 score was higher among individuals with a chronic health problem. Understanding of the workplace and personal factors related to presenteeism may support the health and well-being of workers.     

Assessment of seasonal variations of surface water quality characteristics for Porsuk Stream

In this study, the factor analysis technique is applied to surface water quality data sets obtained from Porsuk stream in Turkey, generated during 10 years (1995-2005) monitoring of 29 parameters at one site (Esenkara) for all four seasons. The varifactors obtained from factor analysis indicate that the parameters responsible for water quality variations are mainly related to mineral and inorganic nutrients, organic pollution, microbiological pollution in winter and spring; mineral and nutrients in summer; microbiological and nutrient pollution in fall. This study presents the necessity and usefulness of multivariate statistical assessment of large and complex databases in order to get better information about the quality of surface water.